Documentation Center

  • Trial Software
  • Product Updates



Constrained equiripple FIR filter


B = firceqrip(n,Fo,DEV)
B = firceqrip(...,'slope',r)
B = firceqrip(...,'passedge')
B = firceqrip(...,'stopedge')
B = firceqrip(...,'high')
B = firceqrip(...,'min')
B = firceqrip(...,'invsinc',C)
B = firceqrip(...,'invdiric',C)


B = firceqrip(n,Fo,DEV) designs an order n filter (filter length equal n + 1) lowpass FIR filter with linear phase.

firceqrip produces the same equiripple lowpass filters that firpm produces using the Parks-McClellan algorithm. The difference is how you specify the filter characteristics for the function.

The input argument Fo specifies the frequency at the upper edge of the passband in normalized frequency (0<Fo<1). The two-element vector dev specifies the peak or maximum error allowed in the passband and stopbands. Enter [d1 d2] for dev where d1 sets the passband error and d2 sets the stopband error.

B = firceqrip(...,'slope',r) uses the input keyword 'slope' and input argument r to design a filter with a nonequiripple stopband. r is specified as a positive constant and determines the slope of the stopband attenuation in dB/normalized frequency. Greater values of r result in increased stopband attenuation in dB/normalized frequency.

B = firceqrip(...,'passedge') designs a filter where Fo specifies the frequency at which the passband starts to rolloff.

B = firceqrip(...,'stopedge') designs a filter where Fo specifies the frequency at which the stopband begins.

B = firceqrip(...,'high') designs a high pass FIR filter instead of a lowpass filter.

B = firceqrip(...,'min') designs a minimum-phase filter.

B = firceqrip(...,'invsinc',C) designs a lowpass filter whose magnitude response has the shape of an inverse sinc function. This may be used to compensate for sinc-like responses in the frequency domain such as the effect of the zero-order hold in a D/A converter. The amount of compensation in the passband is controlled by C, which is specified as a scalar or two-element vector. The elements of C are specified as follows:

  • If C is supplied as a real-valued scalar or the first element of a two-element vector, firceqrip constructs a filter with a magnitude response of 1/sinc(C*pi*F) where F is the normalized frequency.

  • If C is supplied as a two-element vector, the inverse-sinc shaped magnitude response is raised to the positive power C(2). If we set P=C(2), firceqrip constructs a filter with a magnitude response 1/sinc(C*pi*F)P.

If this FIR filter is used with a cascaded integrator-comb (CIC) filter, setting C(2) equal to the number of stages compensates for the multiplicative effect of the successive sinc-like responses of the CIC filters.

    Note:   Since the value of the inverse sinc function becomes unbounded at C=1/F, the value of C should be greater the reciprocal of the passband edge frequency. This can be expressed as Fo<1/C. For users familar with CIC decimators, C is equal to 1/2 the product of the differential delay and decimation factor.

B = firceqrip(...,'invdiric',C) designs a lowpass filter with a passband that has the shape of an inverse Dirichlet sinc function. The frequency response of the inverse Dirichlet sinc function is given by

where C, r, and p are scalars. The input C can be a scalar or vector containing 2 or 3 elements. If C is a scalar, p and r equal 1. If C is a two-element vector, the first element is C and the second element is p, [C p]. If C is a three-element vector, the third element is r, [C p r].


To introduce a few of the variations on FIR filters that you design with firceqrip, these five examples cover both the default syntax b = firceqrip(n,wo,del) and some of the optional input arguments. For each example, the input arguments n, wo, and del remain the same.

Example 1

Design an order = 30 FIR filter.

b = firceqrip(30,0.4,[0.05 0.03]); fvtool(b)

When the plot appears in the Filter Visualization Tool window, select Analysis > Overlay Analysis > Phase Response. Then select View > Full View. This displays the following plot.

Example 2

Design an order = 30 FIR filter with the stopedge keyword to define the response at the edge of the filter stopband.

b = firceqrip(30,0.4,[0.05 0.03],'stopedge'); fvtool(b)

Example 3

Design an order = 30 FIR filter with the slope keyword and r = 20.

b = firceqrip(30,0.4,[0.05 0.03],'slope',20,'stopedge'); fvtool(b)

Example 4

Design an order = 30 FIR filter defining the stopband and specifying that the resulting filter is minimum phase with the min keyword.

b = firceqrip(30,0.4,[0.05 0.03],'stopedge','min'); fvtool(b)

Comparing this filter to the filter in Example 1, the cutoff frequency wo = 0.4 now applies to the edge of the stopband rather than the point at which the frequency response magnitude is 0.5.

Viewing the zero-pole plot shown here reveals this is a minimum phase FIR filter — the zeros lie on or inside the unit circle, z = 1.

Example 5

Design an order = 30 FIR filter with the invsinc keyword to shape the filter passband with an inverse sinc function.

b = firceqrip(30,0.4,[0.05 0.03],'invsinc',[2 1.5]); fvtool(b)

With the inverse sinc function being applied defined as 1/sinc(2*w)1.5, the figure shows the reshaping of the passband that results from using the invsinc keyword option, and entering c as the two-element vector [2 1.5].

Inverse-Dirichlet-Sinc–Shaped Passband

Design two order 30 constrained equiripple FIR filters with inverse-Dirichlet-sinc-shaped passbands. The cutoff frequency in both designs is π/4 radians/sample. Set C=1 in one design C=2 in the second design. The maximum passband and stopband ripple is 0.05. Set p=1 in one design and p=2 in the second design.

Design the filters.

b1 = firceqrip(30,0.25,[0.05 0.05],'invdiric',[1 1]);
b2 = firceqrip(30,0.25,[0.05 0.05],'invdiric',[2 2]);

Obtain the filter frequency responses using freqz. Plot the magnitude responses.

[h1,~] = freqz(b1,1);
[h2,w] = freqz(b2,1);
plot(w,abs(h1)); hold on;
axis([0 pi 0 1.5]);
legend('C=1 p=1','C=2 p=2');

Inspect the stopband ripple in the design with C=1 and p=1. The constrained design sets the maximum ripple to be 0.05. Zoom in on the stopband from the cutoff frequency of π/4 radians/sample to 3π/4 radians/sample.

set(gca,'xlim',[pi/4 3*pi/4]);
grid on;

See Also

| | | | | | | | | | | |

Was this topic helpful?