Documentation Center |
Divide two objects
c = divide(T,a,b)
c = divide(T,a,b) performs division on the elements of a by the elements of b. The result c has the numerictype object T.
If a and b are both fi objects, c has the same fimath object as a. If c has a fi Fixed data type, and any one of the inputs have fi floating point data types, then the fi floating point is converted into a fixed-point value. Intermediate quantities are calculated using the fimath object of a. See Data Type Propagation Rules.
a and b must have the same dimensions unless one is a scalar. If either a or b is scalar, then c has the dimensions of the nonscalar object.
If either a or b is a fi object, and the other is a MATLAB^{®} built-in numeric type, then the built-in object is cast to the word length of the fi object, preserving best-precision fraction length. Intermediate quantities are calculated using the fimath object of the input fi object. See Data Type Propagation Rules.
If a and b are both MATLAB built-in doubles, then c is the floating-point quotient a./b, and numerictype T is ignored.
For syntaxes for which Fixed-Point Designer™ software uses the numerictype object T, the divide function follows the data type propagation rules listed in the following table. In general, these rules can be summarized as "floating-point data types are propagated." This allows you to write code that can be used with both fixed-point and floating-point inputs.
Data Type of Input fi Objects a and b | Data Type of numerictype object T | Data Type of Output c | |
---|---|---|---|
Built-in double | Built-in double | Any | Built-in double |
fi Fixed | fi Fixed | fi Fixed | Data type of numerictype object T |
fi Fixed | fi Fixed | fi double | fi double |
fi Fixed | fi Fixed | fi single | fi single |
fi Fixed | fi Fixed | fi ScaledDouble | fi ScaledDouble with properties of numerictype object T |
fi double | fi double | fi Fixed | fi double |
fi double | fi double | fi double | fi double |
fi double | fi double | fi single | fi single |
fi double | fi double | fi ScaledDouble | fi double |
fi single | fi single | fi Fixed | fi single |
fi single | fi single | fi double | fi double |
fi single | fi single | fi single | fi single |
fi single | fi single | fi ScaledDouble | fi single |
fi ScaledDouble | fi ScaledDouble | fi Fixed | fi ScaledDouble with properties of numerictype object T |
fi ScaledDouble | fi ScaledDouble | fi double | fi double |
fi ScaledDouble | fi ScaledDouble | fi single | fi single |
fi ScaledDouble | fi ScaledDouble | fi ScaledDouble | fi ScaledDouble with properties of numerictype object T |
This example highlights the precision of the fi divide function.
First, create an unsigned fi object with an 80-bit word length and 2^-83 scaling, which puts the leading 1 of the representation into the most significant bit. Initialize the object with double-precision floating-point value 0.1, and examine the binary representation:
P = ... fipref('NumberDisplay','bin',... 'NumericTypeDisplay','short',... 'FimathDisplay','none'); a = fi(0.1, false, 80, 83) a = 11001100110011001100110011001100110011001100110011010000 000000000000000000000000 u80,83
Notice that the infinite repeating representation is truncated after 52 bits, because the mantissa of an IEEE^{®} standard double-precision floating-point number has 52 bits.
Contrast the above to calculating 1/10 in fixed-point arithmetic with the quotient set to the same numeric type as before:
T = numerictype('Signed',false,'WordLength',80,... 'FractionLength',83); a = fi(1); b = fi(10); c = divide(T,a,b); c.bin ans = 11001100110011001100110011001100110011001100110011001100 110011001100110011001100
Notice that when you use the divide function, the quotient is calculated to the full 80 bits, regardless of the precision of a and b. Thus, the fi object c represents 1/10 more precisely than IEEE standard double-precision floating-point number can.
With 1000 bits of precision,
T = numerictype('Signed',false,'WordLength',1000,... 'FractionLength',1003); a = fi(1); b = fi(10); c = divide(T,a,b);c.bin ans =
11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 11001100110011001100110011001100110011001100110011001100 110011001100110011001100110011001100110011001100
add | fi | fimath | mpy | mrdivide | numerictype | rdivide | sub | sum