|On this page…|
The Point Grey adaptor includes support for the following types of Point Grey devices:
If you are having trouble using the Image Acquisition Toolbox™ software with a supported Point Grey camera, follow these troubleshooting steps:
For Point Grey devices, run the application that came with your hardware, FlyCapture, and verify that you can receive live video.
Select Start > Programs > Point Grey Research > FlyCapture2 > FlyCap2.
In FlyCapture, select your device and click OK to open the dialog box that shows the video feed to test that the hardware is working properly.
Note: The Image Acquisition Toolbox software is compatible only with specific driver versions provided with the Point Grey software and is not guaranteed to work with any other versions.
Find out the driver version you are using on your system. To learn how to get this information, see Determining the Driver Version for Point Grey Devices.
Verify that the version is compatible with the Image Acquisition Toolbox software. For the correct driver information, check the list of supported drivers on the Image Acquisition Toolbox product page at the MathWorks Web site (www.mathworks.com/products/imaq).
If you discover that you are using an unsupported driver version, visit the Point Grey Web site (www.ptgrey.com) to download the correct drivers.
Note: If you are using a Point Grey camera that is a GigE Vision device, do not try to use both the Point Grey adaptor and the GigE Vision adaptor at the same time. You should use the Point Grey adaptor.
To determine the Point Grey driver version you are using, run the Point Grey FlyCapture utility.
to see the driver version number.
Select Start > Programs > Point Grey Research > FlyCapture2 > FlyCap2 to open FlyCapture.
In FlyCapture, select Settings > Toggle Camera Control Dialog.
In the Control dialog, select Camera Information. The driver version is included in the information that is displayed there.