|On this page…|
An output function is a function that an optimization function calls at each iteration of its algorithm. Typically, you might use an output function to generate graphical output, record the history of the data the algorithm generates, or halt the algorithm based on the data at the current iteration. You can create an output function as a function file, a local function, or a nested function.
You can use the OutputFcn option with the following MATLAB® optimization functions:
The following is a simple example of an output function that plots the points generated by an optimization function.
function stop = outfun(x, optimValues, state) stop = false; hold on; plot(x(1),x(2),'.'); drawnow
You can use this output function to plot the points generated by fminsearch in solving the optimization problem
To do so,
options = optimset('OutputFcn', @outfun);
to set the value of the Outputfcn field of the options structure to a function handle to outfun.
hold on objfun=@(x) exp(x(1))*(4*x(1)^2+2*x(2)^2+x(1)*x(2)+2*x(2)); [x fval] = fminsearch(objfun, [-1 1], options) hold off
This returns the solution
x = 0.1290 -0.5323 fval = -0.5689
and displays the following plot of the points generated by fminsearch:
The function definition line of the output function has the following form:
stop = outfun(x, optimValues, state)
stop is a flag that is true or false depending on whether the optimization routine should quit or continue. See Stop Flag.
x is the point computed by the algorithm at the current iteration.
optimValues is a structure containing data from the current iteration. Fields in optimValues describes the structure in detail.
state is the current state of the algorithm. States of the Algorithm lists the possible values.
The optimization function passes the values of the input arguments to outfun at each iteration.
The example in Creating and Using an Output Function does not require the output function to preserve data from one iteration to the next. When this is the case, you can write the output function as a function file and call the optimization function directly from the command line. However, if you want your output function to record data from one iteration to the next, you should write a single file that does the following:
Contains the output function as a nested function—see Nested Functions in MATLAB Programming Fundamentals for more information.
Calls the optimization function.
In the following example, the function file also contains the objective function as a local function, although you could also write the objective function as a separate file or as an anonymous function.
Since the nested function has access to variables in the file that contains it, this method enables the output function to preserve variables from one iteration to the next.
The following example uses an output function to record the points generated by fminsearch in solving the optimization problem
The output function returns the sequence of points as a matrix called history.
To run the example, do the following steps:
function [x fval history] = myproblem(x0) history = ; options = optimset('OutputFcn', @myoutput); [x fval] = fminsearch(@objfun, x0,options); function stop = myoutput(x,optimvalues,state); stop = false; if state == 'iter' history = [history; x]; end end function z = objfun(x) z = exp(x(1))*(4*x(1)^2+2*x(2)^2+x(1)*x(2)+2*x(2)); end end
[x fval history] = myproblem([-1 1])
The function fminsearch returns x, the optimal point, and fval, the value of the objective function at x.
x = 0.1290 -0.5323 fval = -0.5689
In addition, the output function myoutput returns the matrix history, which contains the points generated by the algorithm at each iteration, to the MATLAB workspace. The first four rows of history are
history(1:4,:) = -1.0000 1.0000 -1.0000 1.0000 -1.0750 0.9000 -1.0125 0.8500
The final row of points is the same as the optimal point, x.
history(end,:) ans = 0.1290 -0.5323 objfun(history(end,:)) ans = -0.5689
The "Command-Line Display Headings" column of the table lists the headings, corresponding to the optimValues fields that are displayed at the command line when you set the Display parameter of options to 'iter'.
optimValues Field (optimValues.field)
Command-Line Display Heading
Cumulative number of function evaluations
Function value at current point
Iteration number — starts at 0
The following table lists the possible values for state:
The algorithm is in the initial state before the first iteration.
The algorithm is performing an iteration. In this state, the output function can interrupt the current iteration of the optimization. You might want the output function to do this to improve the efficiency of the computations. When state is set to 'interrupt', the values of x and optimValues are the same as at the last call to the output function, in which state is set to 'iter'.
The algorithm is at the end of an iteration.
The algorithm is in the final state after the last iteration.
The following code illustrates how the output function might use the value of state to decide which tasks to perform at the current iteration.
switch state case 'init' % Setup for plots or guis case 'iter' % Make updates to plot or guis as needed. case 'interrupt' % Check conditions to see whether optimization % should quit. case 'done' % Cleanup of plots, guis, or final plot otherwise end
The output argument stop is a flag that is true or false. The flag tells the optimization function whether the optimization should quit or continue. The following examples show typical ways to use the stop flag.
The output function can stop an optimization at any iteration based on the current data in optimValues. For example, the following code sets stop to true if the objective function value is less than 5:
function stop = myoutput(x, optimValues, state) stop = false; % Check if objective function is less than 5. if optimValues.fval < 5 stop = true; end
If you design a GUI to perform optimizations, you can make the output function stop an optimization when a user clicks a Stop button on the GUI. The following code shows how to do this, assuming that the Stop button callback stores the value true in the optimstop field of a handles structure called hObject stored in appdata.
function stop = myoutput(x, optimValues, state) stop = false; % Check if user has requested to stop the optimization. stop = getappdata(hObject,'optimstop');