Documentation Center

  • Trial Software
  • Product Updates

Switched Reluctance Motor

Model the dynamics of switched reluctance motor

Library

Machines

Description

The Switched Reluctance Motor (SRM) block represents three most common switched reluctance motors: three-phase 6/4 SRM, four-phase 8/6 SRM, five-phase 10/8 SRM, as shown in the following figure.

The electric part of the motor is represented by a nonlinear model based on the magnetization characteristic composed of several magnetizing curves and on the torque characteristic computed from the magnetization curves. The mechanic part is represented by a state-space model based on inertia moment and viscous friction coefficient.

To be versatile, two models are implemented for the SRM block: specific and generic models. In the specific SRM model, the magnetization characteristic of the motor is provided in a lookup table. The values are obtained by experimental measurement or calculated by finite-element analysis. In the generic model, the magnetization characteristic is calculated using nonlinear functions and readily available parameters.

Dialog Box and Parameters

Configuration Tab

Type

Specifies a three-phase 6/4 motor, four-phase 8/6 motor, or a five-phase 10/8 motor.

Machine model

Select Generic model or Specific model. The Parameters tab is modified accordingly.

Parameters Tab: Generic Model

Stator resistance

The resistance Rs (Ω) of each stator phase winding.

Inertia

The inertia momentum J (kg.m2).

Friction

The friction coefficient B (N.m.s).

Initial speed and position

The initial rotation speed w0 (rad/s) and initial rotor position Theta0 (rad).

Unaligned inductance

The stator inductance when the rotor is in unaligned position Lq (H).

Aligned inductance

The unsaturated stator inductance when the rotor is in aligned position Ld (H).

Saturated aligned inductance

The saturated stator inductance when the rotor is in aligned position Ldsat (H).

Maximum current

The stator maximum current Im (A).

Maximum flux linkage

The maximum flux linkage ψm (Wb or V.s) corresponding to Im.

Parameters Tab: Specific Model

Stator resistance

The resistance Rs (Ω) of each stator phase winding.

Inertia

The inertia momentum J (kg.m2).

Friction

The friction coefficient B (N.m.s).

Initial speed

The initial rotation speed w0 (rad/s) and initial rotor position Theta0 (rad).

Rotor angle vector

The rotor position Θ (deg) for which the flux linkage is specified.

Stator current vector

The stator current Is (A) for which the flux linkage is specified.

Magnetization characteristic

The 2-D lookup table containing the flux linkage as a function of stator current and rotor position.

Advanced Tab

Plot magnetization curves

If selected, the mask plots the magnetization curves corresponding to the lookup table provided. The magnetization curves represent the machine flux linkage versus the stator current with the rotor position as a parameter.

Sample time (−1 for inherited)

Specifies the sample time used by the block. To inherit the sample time specified in the Powergui block, set this parameter to −1.

Inputs and Outputs

TL

The block input is the mechanical load torque (in N.m). TL is positive in motor operation and negative in generator operation.

m

The block output m is a vector containing several signals. You can demultiplex these signals by using the Bus Selector block from Simulink® library.

Signal

Definition

Units

V

Stator voltages

V

flux

Flux linkage

V.s

I

Stator currents

A

Te

Electromagnetic torque

N.m

w

Rotor speed

rad/s

teta

Rotor position

rad

Example

The power_SwitchedReluctanceMotorpower_SwitchedReluctanceMotor example illustrates the simulation of the Switched Reluctance Motor.

To develop positive torque, the currents in the phases of a SRM must be to the rotor position. The following figure shows the ideal waveforms (Phase A inductance and current) in a 6/4 SRM. Turn-on and turn-off angles refer to the rotor position where the converter's power switch is turned on and turned off, respectively.

References

[1] T.J.E. Miller, Switched Reluctance Motors and Their Control, Clarendon Press, Oxford, 1993.

[2] R. Krishnan, Switched Reluctance Motor Drives, CRC Press, 2001.

[3] D.A. Torrey, X.M. Niu, E.J. Unkauf, "Analytical modelling of variable-reluctance machine magnetisation characteristics," IEE Proceedings - Electric Power Applications, Vol. 142, No. 1, January 1995, pp. 14-22.

[4] H. Le-Huy, P. Brunelle, "Design and Implementation of a Switched Reluctance Motor Generic Model for Simulink SimPowerSystems," Electrimacs2005 Conference.

Was this topic helpful?