This release introduces a new filter design function, designfilt. A single command allows you to design lowpass, highpass, bandpass, bandstop, differentiator, and Hilbert filters, including minimum-order designs, in one step. The designfilt interface leads to readable and self-documenting code that is easy to maintain.
All the filter analysis and data filtering functions offered by the Signal Processing Toolbox™ product can be used with digital filters designed with designfilt.
designfilt also features a Filter Design Assistant—a smart run-time error-recovery mechanism that helps you correct faulty syntax and generates MATLAB® code at the Command Window or in the Editor.
This release enhances SNR, distortion, intermodulation, and spurious free dynamic range measurement functions to provide visualization functionality.
The function sfdr plots the spectrum of the input signal and labels its fundamental component and largest spur. The plot shades the spurious free dynamic range and displays its value; it shows the fundamental, the DC value, and the rest of the signal in different colors. sfdr now uses a Kaiser window by default.
The function sinad plots the spectrum of the input signal, labels its fundamental component, and displays its signal to noise and distortion ratio. The plot shows the fundamental component, the DC value, and the noise in different colors.
The function snr plots the spectrum of the input signal, labels its fundamental component and higher harmonics, and displays its signal-to-noise ratio. The plot shows the fundamental, the noise, and the DC value and harmonics using different colors.
The function thd plots the spectrum of the input signal, labels its fundamental component and harmonics, and displays its total harmonic distortion. The plot shows the fundamental, the harmonics, and the DC level and noise using different colors.
The function toi plots the spectrum of the input signal, annotates its lower and upper fundamentals and intermodulation products, and displays its third-order intercept point.
The R2014a release changes the name-value pair arguments 'MidPct' and 'PctRefLevels' to 'MidPercentReferenceLevel' and 'PercentReferenceLevels' for the following signal measurement functions: dutycycle, falltime, midcross, pulseperiod, pulsesep, pulsewidth, risetime, settlingtime, slewrate, overshoot, and undershoot.
|Functionality||What Happens When You Use This Functionality?||Use This Instead||Compatibility Considerations|
|'MidPct' name-value pair of measurement functions||Still runs||'MidPercentReferenceLevel'||Replace all instances of 'MidPct' with 'MidPercentReferenceLevel'|
|'PctRefLevels' name-value pair of measurement functions||Still runs||'PercentReferenceLevels'||Replace all instances of 'PctRefLevels' with 'PercentReferenceLevels'|
This release introduces four frequency-domain measurement functions that allow you to characterize the nonlinearity of a system. Quantitative measures of system linearity are important in a number of applications including audio system analysis, power electronics, and radio-frequency (RF) network analysis.
Use thd to measure the total harmonic distortion (THD) of a sinusoidal signal. THD is appropriate for signals with discrete spectra consisting of a fundamental frequency and one or more harmonics.
Use sinad to measure the signal to noise and distortion ratio (SINAD) of a signal. SINAD is appropriate for signals with mixed spectra consisting of a fundamental frequency with one or more harmonics and additive noise.
Use toi to measure the third-order intercept (TOI) point. TOI is used to quantify the intermodulation distortion of a system in response to a two-tone input.
Use snr to measure the signal-to-noise ratio (SNR) of a signal. SNR is appropriate when you want to measure the power of the fundamental frequency in comparison to the variance of additive noise.
This release introduces two new functions for raised cosine and Gaussian pulse-shaping filter design. The new functions provide a uniform interface for transmit and receive pulse-shaping filters that is designed specifically for communication engineers.
Raised cosine filters are used to minimize intersymbol interference (ISI) by shaping pulses with a filter that satisfies the Nyquist ISI criterion. Use rcosdesign to design a raised cosine or square-root raised cosine finite impulse response pulse-shaping filter.
Gaussian pulse-shaping filters are used in modulation schemes such as Gaussian minimum shift keying (GMSK) to limit the bandwidth of pulse waveforms. Use gaussdesign to design a Gaussian finite impulse response pulse-shaping filter.
|Functionality||What Happens When You Use This Functionality?||Use This Instead||Compatibility Considerations|
|firrcos||Still runs||rcosdesign||Replace all instances of firrcos with rcosdesign. See Migrate from firrcos to rcosdesign.|
|gaussfir||Still runs||gaussdesign||Replace all instances of gaussfir with gaussdesign. See Migrate from gaussfir to gaussdesign.|
|fdesign.pulseshaping||Still runs||rcosdesign or gaussdesign||Replace all instances of fdesign.pulseshaping with rcosdesign or gaussdesign, as appropriate. See Migrate from fdesign.pulseshaping to rcosdesign or gaussdesign.|
This release introduces three new functions for power measurements in the frequency domain. To measure the average power contained in a specified frequency interval, use bandpower. You can measure the spurious-free dynamic range using sfdr. The spurious-free dynamic range is the ratio of powers for the fundamental, or carrier frequency, to the next largest component. The function enbw measures the equivalent noise bandwidth of a window. The equivalent noise bandwidth is the width of an ideal rectangular filter with peak power equal to the peak power of the window. The product of the peak power and the equivalent noise bandwidth is equal to the power obtained by integrating under the magnitude-squared Fourier transform of the window function.
This release enhances functions for nonparametric and parametric power spectral density (PSD) function estimation. In R2013a, nonparametric PSD estimators provide confidence intervals based on the chi-square probability distribution. Parametric PSD estimators provide confidence intervals based on the Gaussian probability distribution. All nonparametric and parametric PSD estimators include the ability to obtain a two-sided PSD estimate with 0 frequency (DC) in the center. See periodogram , pwelch, and pmtm for information on obtaining confidence intervals and DC centered spectra for nonparametric PSD estimation. See pburg , pcov, pmcov, and pyulear for information on obtaining confidence intervals and DC centered spectra for parametric PSD estimation.
This release enhances a number of filter analysis and implementation functions to accept single-precision floating point inputs. In R2013a, you can use single-precision filter coefficients with filter analysis functions, such as freqz, fvtool, grpdelay, impz, phasez, and zerophase. If you input single-precision filter coefficients, the analysis function outputs are single precision.
In R2013a, the filtering function, sosfilt, accepts single-precision inputs for both the filter coefficients and data. If either the second-order section matrix input or the data is single-precision, sosfilt outputs single-precision data.
The filtering functions fftfilt , filtfilt, and latcfilt still require double-precision inputs.
This release removes the requirement for DSP System Toolbox™ to generate standalone C and C++ code for supported Signal Processing Toolbox functions. You must have MATLAB Coder™ and Signal Processing Toolbox software to generate standalone C and C++ code for supported functions. See Functions Supported for Code Generation for a list of Signal Processing Toolbox functions with code generation support if you have MATLAB Coder software.
|Functionality||What Happens When You Use This Functionality?||Use This Instead||Compatibility Considerations|
|dspdata.avgpower||Still runs||bandpower||Replace all instances of dspdata.avgpower with bandpower|
|dspdata.msspectrum||Still runs||periodogram, pwelch||Replace all instances of dspdata.msspectrum with the appropriate function interface|
|dspdata.psd||Still runs||pburg, pcov, periodogram, pmcov, pmtm, pwelch, pyulear||Replace all instances of dspdata.psd with the appropriate function interface|
|dspdata.pseudospectrum||Still runs||peig, pmusic||Replace all instances of dspdata.pseudospectrum with the appropriate function interface|
|dspdata.sfdr||Still runs||sfdr||Replace all instances of dspdata.sfdr with sfdr|
|sigwin.barthannwin||Still runs||barthannwin||Replace all instances of sigwin.barthannwin with barthannwin|
|sigwin.bartlett||Still runs||bartlett||Replace all instances of sigwin.bartlett with bartlett|
|sigwin.blackman||Still runs||blackman||Replace all instances of sigwin.blackman with blackman|
|sigwin.blackmanharris||Still runs||blackmanharris||Replace all instances of sigwin.blackmanharris with blackmanharris|
|sigwin.bohmanwin||Still runs||bohmanwin||Replace all instances of sigwin.bohmanwin with bohmanwin|
|sigwin.chebwin||Still runs||chebwin||Replace all instances of sigwin.chebwin with chebwin|
|sigwin.flattopwin||Still runs||flattopwin||Replace all instances of sigwin.flattopwin with flattopwin|
|sigwin.gausswin||Still runs||gausswin||Replace all instances of sigwin.gausswin with gausswin|
|sigwin.hamming||Still runs||hamming||Replace all instances of sigwin.hamming with hamming|
|sigwin.hann||Still runs||hann||Replace all instances of sigwin.hann with hann|
|sigwin.kaiser||Still runs||kaiser||Replace all instances of sigwin.kaiser with kaiser|
|sigwin.nuttallwin||Still runs||nuttallwin||Replace all instances of sigwin.nuttallwin with nuttallwin|
|sigwin.parzenwin||Still runs||parzenwin||Replace all instances of sigwin.parzenwin with parzenwin|
|sigwin.rectwin||Still runs||rectwin||Replace all instances of sigwin.rectwin with rectwin|
|sigwin.taylorwin||Still runs||taylorwin||Replace all instances of sigwin.taylorwin with taylorwin|
|sigwin.triang||Still runs||triang||Replace all instances of sigwin.triang with triang|
|sigwin.tukeywin||Still runs||tukeywin||Replace all instances of sigwin.tukeywin with tukeywin|
|spectrum.burg||Still runs||pburg||Replace all instances of spectrum.burg with pburg|
|spectrum.cov||Still runs||pcov||Replace all instances of spectrum.cov with pcov|
|spectrum.eig||Still runs||peig||Replace all instances of spectrum.eig with peig|
|spectrum.mcov||Still runs||pmcov||Replace all instances of spectrum.mcov with pmcov|
|spectrum.mtm||Still runs||pmtm||Replace all instances of spectrum.mtm with pmtm|
|spectrum.music||Still runs||pmusic||Replace all instances of spectrum.music with pmusic|
|spectrum.periodogram||Still runs||periodogram||Replace all instances of spectrum.periodogram with periodogram|
|spectrum.welch||Still runs||pwelch||Replace all instances of spectrum.welch with pwelch|
The R2012b release introduces a revamped Signal Browser GUI. Whenever you select one or more signals in the Signals list box and click the View button, The Signal Browser GUI launches from the SPTool GUI. The Signal Browser allows you to perform the following additional operations:
Time Domain Measurements Panels — The Signal Browser includes new side panels labeled Trace Selection, Cursor Measurements, Signal Statistics, Bilevel Measurements, and Peak Finder.
The Trace Selection panel allows you to choose which signal to make the active signal when you select multiple input signals in the Signals list box in SPTool. This panel replaces the Select Trace toolbar button ( ) and Select a trace dialog box that were used in previous releases to choose an active signal. In the Signal Browser menu, select Tools > Measurements > Trace Selection.
The Cursor Measurements panel displays screen cursors. This panel replaces the Markers menu and all the corresponding toolbar buttons that were used in previous releases to show and configure markers. In the Signal Browser toolbar, click the Cursor Measurements button ( ). Alternatively, in the Signal Browser menu, select Tools > Measurements > Cursor Measurements.
The Signal Statistics panel displays the maximum, minimum, peak-to-peak difference, mean, median, and RMS values of a selected signal. It also displays the times at which the maximum and minimum values occur. In the Signal Browser toolbar, click the Signal Statistics button ( ). Alternatively, in the Signal Browser menu, select Tools > Measurements > Signal Statistics.
The Bilevel Measurements panel displays information about a selected signal's transitions, overshoots or undershoots, and cycles. In the Signal Browser toolbar, click the Bilevel Measurements button ( ). Alternatively, in the Signal Browser menu, select Tools > Measurements > Bilevel Measurements.
The Peak Finder panel displays maxima and the times at which they occur. These displays allow you to modify the settings for peak threshold, maximum number of peaks, and peak excursion. In the Signal Browser toolbar, click the Peak Finder button ( ). Alternatively, in the Signal Browser menu, select Tools > Measurements > Peak Finder.
Multiple Display Support — R2012b enhances the Signal Browser by allowing you to choose to have multiple displays. This feature allows you to tile your screen into a number of separate displays, up to a grid of 4 rows and 4 columns. You may find multiple displays useful when you select multiple input signals in the Signals list box in SPTool. To set the number of displays, in the Signal Browser toolbar, click the Layout button ( ). Alternatively, in the Signal Browser menu, select View > Layout.
Style dialog box — R2012b enhances the Signal Browser by allowing you to customize the style of displays using a Style dialog box. You can change the color of the figure containing the displays, the background and foreground colors of display axes, and properties of lines in a display. The Style dialog box replaces the Line Properties toolbar button and Edit Line dialog box that were used in previous releases for customizing line properties. To view or modify the line style of the active signal, in the Signal Browser menu, select View > Style. You can also right-click on the display and select Style. The Signal Browser — Style dialog box opens.
Sampled data as stairs — The Signal Browser can display a signal as a stairstep graph. A stairstep graph includes only horizontal lines and vertical lines. Each horizontal line represents the signal value for a discrete sample period and is connected to two vertical lines. Each vertical line represents a change in values occurring at a sample. Using this approach is equivalent to using the MATLAB stairs function. Stairstep graphs are useful for drawing time history graphs of digitally sampled data. To display a sampled signal as a Stairstep graph, in the Signal Browser — Style dialog box, set the Plot type parameter to Stairs.
Properties dialog box — R2012b enhances the Signal Browser by providing a central location where you can modify the properties of a display. To change options for a display, in the Signal Browser menu, select View > Properties. You can also right-click on the display and select Properties. The Signal Browser — Visuals:Time Domain Options dialog box opens.
Complex data support — The Signal Browser accepts complex-valued input signals and can visualize them in two distinct fashions. By default, the complex data is displayed in real and imaginary form as different-colored lines on the same axes. Alternately, you can display the magnitude and phase of the signal on separate axes in the same display. To change the complex data options, in the Signal Browser — Visuals:Time Domain Options dialog box, select the Display tab. Then, select or clear the Plot signal(s) as magnitude and phase check box.
Ability to change the time units of the display — The Signal Browser allows you to label the time-axis in three different ways. First, you can confirm the default operation, in which the Signal Browser displays time in metric units. The Signal Browser chooses the appropriate metric units, based on the minimum time-axis limit and the maximum time-axis limit of the scope window. Second, you can verify that the time-axis is always labeled as Time (seconds) and that the appropriate power of 10 appears in the bottom-right corner of the Time Scope display. Finally, you remove the units in the time-axis label entirely. To change the manner in which the time units are displayed, in the Signal Browser — Visuals:Time Domain Options dialog box, select the Main tab. Then, set the Time Units parameter to either Metric (based on Time Span), Seconds, or None, respectively.
See the Signal Browser reference topic for more information.
The R2012b Signal Browser GUI replaces the tool available in previous releases that was also named Signal Browser. In R2012b, you can still use the Signal Browser from previous releases, which is hereafter referred to as the Legacy Browser. To do so, execute the following steps.
In the SPTool menu, select File > Preferences.
In the list at the left side, select Signal Browser.
Under Signal Browser, select the Use Legacy Browser (to be removed) check box.
Now when you select one or more signals from the Signals list and click the View button, the Legacy Browser opens.
The R2012b release introduces GPU acceleration for xcorr, xcorr2, fftfilt, xcov,
GPU acceleration for these functions requires Parallel Computing Toolbox™ software
and meeting the GPU computing requirements detailed here:
If you have the Parallel Computing Toolbox, you can use gpuArray to create a GPUArray object. The supported Signal Processing Toolbox functions accept GPUArray objects as inputs.
In R2012a, you can perform a number of basic measurements on bilevel pulse waveforms. These measurements include:
State levels — You can estimate the state levels of a bilevel waveform using the histogram method with statelevels.
Transition metrics — You can measure the rise time, fall time, and mid-reference level instants of waveform transitions. See the help for midcross, risetime, falltime, and slewrate for details. Additionally, R2012a introduces pulse metrics to measure bilevel waveform behavior in pretransition and posttransition regions including, overshoot, undershoot, and settlingtime.
In R2011b, you can specify passband and stopband weights for a fixed-order unconstrained partial band differentiator filter design. You can access this capability through filterbuilder and fdesign.differentiator. With fdesign.differentiator, use the specification string 'N,Fp,Fst', and set the design method to 'equiripple'. The following example shows you how to see the passband weight, Wpass, and stopband weight, Wstop, design options.
d = fdesign.differentiator('N,Fp,Fst',30,0.25,0.5); designopts(d,'equiripple')
Specify the passband or stopband weight values when you design your equiripple filter. For example:
Hd = design(d,'equiripple','Wstop',4);
In R2011b, you can specify different numerator and denominator orders in filterbuilder for lowpass and highpass Butterworth (maxflat) designs.
Access this option in filterbuilder by setting Impulse response under Filter specifications to IIR and Order mode to Specify. The default is equal order for both the numerator and denominator. Check Denominator order to specify a different denominator order.
For R2011b, Signal Processing Toolbox error and warning message identifiers have changed.
If you have scripts or functions that use these changed message identifiers, you must update the code to use the new identifiers. Typically, message identifiers are used to turn off specific warning messages. You can also use them in code that uses a try/catch statement and performs an action based on a specific error identifier.
If your code checks for a message identifier in a warning or error, you must update it to check for the new warning or error instead. To determine the identifier for a warning, run the following command just after you see the warning:
[MSG,MSGID] = lastwarn;
This command saves the message identifier to the variable MSGID.
To determine the identifier for an error, run the following command just after you see the error:
exception = MException.last; MSGID = exception.identifier;
In R2011a, there are two major enhancements to filtfilt:
filtfilt has been completely rewritten to improve performance. Actual performance improvement depends on your hardware, filter length, signal length, and number of channels.
filtfilt now accepts IIR filters in second-order section (biquad) form.
In R2011a, blackmanharris and nuttallwin have a symmetric window design option. The input argument SFLAG controls the window option and defaults to 'symmetric'. 'periodic' returns a N-periodic window. The default symmetric option is preferred in FIR filter design because it results in linear phase. In spectral analysis applications, the periodic option is preferred.
win = blackman(N,'periodic'); % N is the window length
win = nuttallwin(N,'periodic'); % N is the window length
In R2011a, rectpuls returns a double-precision vector instead of a logical vector.
In previous releases, rectpuls returns a logical vector. To produce behavior in R2011a consistent with previous releases, cast the output of rectpuls to a logical vector.
t = linspace(0,1,0.01); y = logical(rectpuls(t));
In R2011a, MathWorks® is no longer using the term Embedded MATLAB to refer to the language subset that supports code generation from MATLAB algorithms. This nomenclature incorrectly implies that the generated code is used in embedded systems only.
The new term is code generation from MATLAB. This terminology better reflects the full extent of the capability for translating MATLAB algorithms into readable, efficient, and compact MEX and C/C++ code for deployment to both desktop and embedded systems.
Signal Processing Toolbox users who have the DSP System Toolbox and MATLAB Coder software can generate deployable C/C++ code and MEX files using supported functions in the Signal Processing Toolbox.
You can find material on using Code Generation from MATLAB with the Signal Processing Toolbox software in Code Generation from MATLAB Support in Signal Processing Toolbox.
Users who have the DSP System Toolbox and Fixed-Point Toolbox™ can accelerate MEX-files for fixed-point applications using fiaccel.
The functionality associated with C/C++ and MEX code generation from MATLAB has changed in R2011a. These changes include:
The compiler flag #codegen replaces #eml.
codegen replaces emlc and emlmex for generating deployable C/C++ code and MEX-files from MATLAB algorithms. You must have the DSP System Toolbox and the MATLAB Coder software to use codegen.
fiaccel replaces emlmex for generating fixed-point MEX code from MATLAB algorithms. To use fiaccel, you must have the DSP System Toolbox and Fixed-Point Toolbox software and your MATLAB code must satisfy the conditions described on the fiaccel reference page.
In R2010a, users can construct dfilt objects with single-precision floating point arithmetic. Set the Arithmetic property to 'single' to obtain a single-precision floating point representation of the filter coefficients.
In R2010a, Embedded MATLAB supports additional functions in the Signal Processing Toolbox. You can find a comprehensive list of supported functions in the Function Library Reference. You can find examples of using supported functions with the Signal Processing Toolbox software at Code Generation from MATLAB Support in Signal Processing Toolbox.
|Name||What Happens When you use the Function, Object, Object Method, or Object Property||Use Instead||Compatibility Considerations|
|addsection (Method for dfilt.cascade and dfilt.parallel objects)||Errors||addstage method||Replace all instances of the addsection method with the addstage method for dfilt.cascade and dfilt.parallel objects.|
|FFTLength (Property of spectrum objects)||Errors||'NFFT' parameter in psd or msspectrum methods||Replace all instances of the FFTLength property in spectrum objects by the 'NFFT' parameter in the psd or msspectrum methods.|
|freqzplot||Warns||fvtool||Replace all instances of freqzplot with fvtool.|
|removesection (Method for dfilt.cascade and dfilt.parallel objects)||Errors||removestage method||Replace all instances of the removesection method with the removestage method for dfilt.cascade and dfilt.parallel objects.|
|Section (Property of dfilt.cascade and dfilt.parallel objects)||Errors||Stage property||Replace all instances of the Section property with the Stage property for dfilt.cascade and dfilt.parallel objects.|
|Sidelobe_atten (Property of sigwin.chebwin object)||Errors||SidelobeAtten property||Replace all instances of the Sidelobe_atten property with the SidelobeAtten property for sigwin.chebwin objects.|
|specplot||Warns||plot method with DSPDATA object||Replace all instances of specplot with the plot method for DSPDATA objects.|
In R2010a, the use of Filter Designer in sptool is not recommended. Use fdatool instead. Under File —> Preferences-> Filter Designer in SPTool, you may still select to use Filter Designer, but you will receive a warning that Filter Designer will be removed in a future release. If you select Filter Designer, you will be prompted to change your preferences in the sigprefs.mat and startup.spt files when you exit SPTool. Changing your preferences to use Filter Designer results in a warning each time SPTool starts. See Setting Preferences and Saving and Loading Sessions for details.
Because a future release will remove Filter Designer , use fdatool instead. Filters created in Filter Designer are not compatible with FDATool. Under File —> Preferences-> Filter Designer in sptool, you can select to use FDATool. You receive a prompt to convert filters created in Filter Designer to a format compatible with FDATool. When you exit sptool after changing your preferences, you receive another prompt, instructing you to update your preferences to use FDATool.
In R2009b, Embedded MATLAB supports the generation of embeddable C code for a subset of Signal Processing Toolbox filter design and window generation functions. You must install both the Signal Processing Toolbox and Signal Processing Blockset™ software to use this feature. Depending on which Embedded MATLAB feature you wish to use, additional products are required. The generated C code meets the strict memory and data type requirements of embedded target environments. See Code Generation from MATLAB Support in Signal Processing Toolbox for a list of supported Signal Processing Toolbox functions and examples.
If you use Simulink®, you can now use the new MapCoeffstoPorts property with realizemdl to map filter coefficients from dfilt objects to constant blocks. The coefficients also appear in the MATLAB workspace providing tunability to the realized Simulink model. See dfilt for a list of supported filter structures and any restrictions.
A new and more robust way to design filters has been added to the toolbox —fdesign objects and the filterbuilder GUI. The following filter responses are supported: lowpass, highpass, bandpass, bandstop, Hilbert, differentiator, pulse-shaping (including FIR Gaussian) and arbitrary magnitude. Advanced design methods and additional responses are available in Filter Design Toolbox™.
A new option has been added to the dfilt block method to specify filter coefficients via Simulink block ports.
A new marcumq function, which implements the generalized Marcum Q function, has been added to the toolbox.
You can now specify whether to keep or drop the last taper for calculating the pmtm, which returns the PSD using the Thomson multitaper method. By default, the last taper is dropped. If you set the DropLastTaper property false, the last taper is included.
The spectrum object has been enhanced with a new method for calculating confidence intervals for PSDs and mean-squared spectra.
The dspdata object has been enhanced with a new method to measure spurious-free dynamic range (SFDR) for mean-squared spectra.
A new function (cconv) that computes circular convolution has been added to the toolbox.
spectrum objects now support computing the spectrum and pseudospectrum on a user-specified vector of frequencies. This vector identifies the frequencies at which the spectrum or pseudospectrum is calculated.
A more detailed explanation of the factorize algorithm and an example have been added to the cceps reference page.
You can now create a Simulink block from dfilt.statespace objects with the dfilt realizemdl method.
The spectral analysis command line functions (pburg, pcov, peig, periodogram, pmcov, pmtm, pmusic, pwelch, and pyulear) now accept a frequency vector as an input parameter. This vector identifies the frequencies at which the spectral analysis function returns an estimate.
The FFTLength parameter has been removed from all spectrum objects and you now specify the number of FFT points (NFFT) via the psd, msspectrum, or pseudospectrum estimation method. The NFFT value can be an integer or a string (either 'Nextpow2' or 'Auto'). 'Nextpow2' is the default and sets the number of FFT points to the next power of 2 greater than the input signal length (or the segment length for spectrum.welch objects). 'Auto' sets the number of FFT points to be equal to the input signal or segment length.
You should update any existing code that specifies the FFTLength parameter and instead use the NFFT parameter associated with an estimation method.
You should also verify that any spectrum.welch objects are using the desired FFT length, since the FFT length is now based on the segment length instead of the input signal length.
The dfilt block method now allows you to specify a target subsystem in your Simulink model where you want to place the block. Two new parameters implement this: 'Destination' and 'Link2Obj'. The 'Destination' specifies where to place the block and 'Link2Obj' creates a link between the block in your model and inputs from the command line.
The alpha parameter in the formula used in gaussfir has been updated to match the formula in Rappaport T.S., Wireless Communications Principles and Practice, 2nd Edition, Prentice Hall, 2001.
A new function taylorwin for generating Taylor windows has been added.
FDATool has replaced the SPTool Filter Designer as the preferred method for designing filters for use in SPTool. For details, see FDATool in the Signal Processing Toolbox documentation.
The format in which filters are saved differs between SPTool Filter Designer and FDATool. When you load an SPTool session with saved filters, you are prompted to upgrade your filters to use FDATool format.
The example for sgolay has been improved and expanded.
A new parameter zeroflag has been added to zp2sos. This parameter is used for real zeros that are the negatives of each other. For these zeros it specifies whether to keep them together instead of ordering them according to proximity to poles.
A new delay structure (dfilt.delay) has been added to dfilt objects. This structure adds latency to any signal filtered with it.
A Normalize magnitude option has been added to the Analysis Parameters of WinTool and WVTool magnitude plots.
The default plots for filter responses have been improved. The y-axis autoscaling includes buffer regions around the data and shows only the significant data. To see all of the data without any buffer regions, select Full view from the View menu.
You can draw lines on your filter response in FDATool to indicate rejection areas.
FDATool now supports generating C header files for complex filters.
A new Tip of the Day dialog displays when you start FDATool. It contains tips and hints for using FDATool.
FDATool no longer supports state space filters.
If you load a saved FDATool session that contains a state space filter, it is converted to a direct-form II transposed filter.
Three new options have been added to the Analysis Parameters for magnitude response displays.
Normalize Magnitude to 1 (0 dB) — displays the magnitude so that the maximum magnitude value occurs at 0 dB
Autoscale axes — automatically scales the response data y-axis
dB Display Range — If you are not using autoscale and the magnitude display is in dB, this allows you to specify the y-axis limits, .
The coefficient view in FVTool now displays each section of a second-order section filter as a separate filter with its own numerator, denominator, and gain.
The default units for the phase response in FVTool have been changed to radians. This is consistent with the phasez function.
You should verify that the FVTool phase plots generated by existing code display the desired units.
The dfilt coefficients method has been changed to the coeffs method, which returns a structure. See the Methods section of dfilt for information.
You should update any code that uses the coefficients method to use the new coeffs method and its returned structure.
You cannot pass filter states (initial and final conditions) via the dfilt filter method. You must use the states property. See dfilt for more information.
You should update any code that passed filter states via the dfilt filter method to use the new states property.
spectrogram has been added to replace the grandfathered specgram function. If you use this function with no outputs, a surface plot is displayed, instead of an image.
You should update any code that references specgram to use the new spectrogram function. spectrogram uses different default values than specgram and the order of the inputs has changed.
pwelch (and the other spectrum analysis functions) no longer accept 'half' or 'whole'. You must use 'onesided' or 'twosided' to indicate the type of analysis you want.
You should update any code that uses 'half' or 'whole' with spectral analysis functions and instead use 'onesided' or 'twosided', respectively.
The following functions and methods now generate standard MATLAB plots, instead of launching an interactive plot. Refer to the MATLAB documentation for information on plots.
gaussfir has been added to replace the grandfathered firgauss function. gaussfir uses parameters that are common to communications systems.
You should update any code that references firgauss to use the new gaussfir.
You should update any code that uses firpm or cfirpm so that it will work correctly with function handle inputs instead of string input.
Signal Processing Toolbox demos have been reorganized and a new demo on the analysis of a numerically controlled oscillator (NCO) has been added.
The Filter Wizard no longer requires Filter Design Toolbox software. You can use the Filter Wizard if you have Signal Processing Toolbox software and Simulink installed. If you have the Filter Design Toolbox™ software installed, more options are available. See dspfwiz for more information.
|Release||Features or Changes with Compatibility Considerations|
|R2014a||Changes in name-value pair arguments of measurement functions|
|R2013b||Functionality Being Removed or Changed|
|R2013a||Functionality Being Removed or Changed|
|R2012b||Signal Browser in SPTool|
|R2011b||Conversion of Error and Warning Message Identifiers|
|R2006b||FFT Length in Spectral Analyses Changed|
|R2006a||SPTool Filter Designer Replaced by FDATool|